SKU: 33182566347
stone indoor plant pots

stone indoor plant pots Bulb Cast Stone Planter

Sale price$25.91 Regular price$28.79
Save 10%

Pay in installments of $7.20 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 24 - Sep 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

stone indoor plant pots Bulb Cast Stone PlanterPhysical color samples available. Please contact us for more information. Bulb Cast Stone Planter Specifications: Dimensions: 9W x 3. 5H Base: 6. 5"W Weight: 6 lbs. Shown in Alpine Stone (AS) Due to the nature of concrete there is very little that can go wrong with it as long as it's properly cared for. For this reason Campania does not offer a warranty for their products. Our 15+ years of experience has shown that Campania's products are more than

Physical color samples available.  Please contact us for more information.

Bulb Cast Stone Planter Specifications:

  • Dimensions: 9″W x 3.5″H
  • Base: 6.5"W
  • Weight: 6 lbs.
  • Shown in Alpine Stone (AS)

    Due to the nature of concrete there is very little that can go wrong with it as long as it's properly cared for. For this reason Campania does not offer a warranty for their products. Our 15+ years of experience has shown that Campania's products are more than capable of withstanding the test of time. These products are designed to last well over 40 years, and will as long as proper care is provided for them.

    Bulb Cast Stone Planter Features:

    • Makes a beautiful focal point for your garden setting, either filled with beautiful blooms or greens, or left empty as a wonderful accent piece
    • One drainage hole, centered, approximately 1/2"
    • Manufactured with a high density cast stone mix
    • Available in your choice of classic and distinct finishes
    • Finish/Stain is hand applied by trained artisans
    • Features unique designer detail and superior craftsmanship
    • Weathers naturally outdoors
    • Made in the USA

    In the winter, if a planter is to remain planted, it should be raised up off the ground making sure not to block the drainage hole. This allows the planter to drain and will prevent the planter from freezing to the ground. If the planter is not to be planted, it should be brought inside a garage or shed. If this is not possible, follow the steps above, but turn the planter upside down to prevent it from filling with snow and ice. It should then be covered or wrapped with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic to prevent it from accumulating moisture.

    Campania proudly manufactures its cast stone products in the USA using locally sourced materials. All of our cast stone pieces are manufactured using the wet casting technique with a proprietary high density cast stone mix, yielding a PSI strength of approximately 7,500. The mix is comprised primarily of water, sand, stone aggregate and cement. Our cast stone products may qualify for LEED credits as applicable to your project. Cast stone produces a strong and durable product that will weather naturally in an outdoor environment. Simply stated, cast stone is chosen for its beauty and authenticity. Our material is natural, authentic, made in the USA, and 100% recyclable.

    NOTE: All of our patinas are hand applied in a multi-step process which produces unique and beautiful surface finishes. Designed to replicate the look of naturally aged materials, the patinas will not prevent the natural aging process that occurs in an outdoor environment. Rather than creating uniform stains, our approach gives our products their unique beauty and appeal.

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 33182566347

    Discover Niche Categories That Outsell stone indoor plant pots

    Top-Converting Item to Boost Your Average Order

    4.5 ★★★★★
    Based on 13 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    A
    Verified Purchase
    AmazinFrank
    West Palm Beach, US
    ★★★★★ 5
    Very good product at a fair price
    Model: SLH20025
    Very good sound deadener and heat shield, it is a bit sticky to work with, but easy to shape and cut
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 19, 2026
    E
    Verified Purchase
    Eric Caldeira
    Omaha, US
    ★★★★★ 5
    I wish I had Siless 20 years ago!!!
    Model: SLH20025, Model: SLH20025
    I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on September 21, 2025
    M
    Verified Purchase
    Mark Kadrich
    Alexandria, US
    ★★★★★ 5
    Works well and is easy to install.
    Model: SLH20025, Model: SLH20025
    I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on April 13, 2025
    J
    Verified Purchase
    Josh
    Cuba, US
    ★★★★★ 5
    Great product. Best value i could find
    Model: SLH20025
    I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 6, 2026
    W
    Verified Purchase
    william scott
    Lexington, US
    ★★★★★ 4
    Not simple, nor easy
    Model: SLH20025
    I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 18, 2025

    recommand products