If you’re interested in the high-carbon Bio Carb All Natural Hi-Impact Soil Amendment, you can buy it here and learn more.
Pay in installments of $6.65 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 30 - Oct 5
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
fertilizer for tobacco plants Turbo Soil Bio-Blend, Superior Organic Soil Amendment, 3 pound bagWhat is Turbo Soil Bio Blend? Turbo Soil Bio Blend boosts your soil without replacing it. It mixes easily into existing, weak soil. This 3 lb organic blend combines Bio Carb humate, amino acids, Endo Mycorrhizal spores, crab shell meal, kelp, and yucca extract. It improves soil health, strengthens roots, and supports plant growth. Works for gardens, lawns, houseplants, and farms. Why Choose TurboSoil: Complete Soil Revival System: TurboSoil mixes six
What is Turbo Soil Bio-Blend?
Turbo Soil Bio-Blend boosts your soil without replacing it. It mixes easily into existing, weak soil. This 3 lb organic blend combines Bio-Carb humate, amino acids, Endo Mycorrhizal spores, crab shell meal, kelp, and yucca extract. It improves soil health, strengthens roots, and supports plant growth. Works for gardens, lawns, houseplants, and farms.
Why Choose TurboSoil:
- Complete Soil Revival System: TurboSoil mixes six natural, science-backed ingredients—Bio-Carb humate, crab shell, amino acids, kelp, yucca, and mycorrhizae—to turn weak soil into healthy, thriving soil.
- Boosts Root Growth: Mycorrhizae and amino acids strengthen roots and improve nutrient uptake for stronger, more resilient plants.
- Improves Moisture and Nutrients: Yucca helps water penetrate evenly, while humates keep nutrients available in the root zone.
- Protects and Restores Soil Health: Crab shell adds calcium and chitin to support microbes, strengthen plant cell walls, and reduce soil pests.
- All-Natural and Safe: 100% organic ingredients safe for plants, pets, and people. Perfect for gardens, lawns, raised beds, trees, and potted plants.
TurboSoil is a complete all-in-one soil enhancer designed by GS Plant Foods to provide everything healthy soil needs to thrive. This premium organic blend combines Bio-Carb humates to strengthen soil structure, crab shell for natural calcium and chitin, amino acids to nourish plant metabolism, kelp for growth hormones and trace minerals, yucca to improve water penetration, and a mix of endo- and ecto-mycorrhizae to boost root performance.
The result is a living, breathing soil system that maximizes nutrient uptake, encourages deep root growth, and builds long-term fertility. Use TurboSoil to jumpstart new plantings, restore compacted or depleted soils, or as part of a regular maintenance routine to keep your garden, lawn, or crops thriving at their best.
Key Benefits
- Endo Mycorrhizal spores (9 strains!) colonize roots, boosting nutrient/water uptake by 300%.
- Crab shell meal adds calcium/magnesium; amino acids provide slow-release nitrogen.
- Yucca extract’s saponins reduce surface tension, ensuring deeper moisture penetration.
- Organic kelp minimizes transplant shock and accelerates seed germination.
- 100% natural ingredients—safe for pets, kids, and pollinators.
Ingredient Breakdown
-
Bio-Carb Humate: Ancient carbon-rich humate rebuilds soil structure and fuels microbial life.
-
Endo Mycorrhizal Blend: 9 spore strains (Glomus mosseae, Gigaspora margarita, etc.) for symbiotic root support.
-
Crab Shell: Slow-release calcium source + natural nematode control.
-
Organic Kelp: Enhances root mass and plant resilience.
-
Yucca Extract: Maximizes water/nutrient absorption with 60% saponins.
-
Plant-Based Amino Acids: Organic nitrogen for lush foliage and vigorous growth.
How to Use
Simple Application for Explosive Growth:
Turbo Soil is not for replacing your soil, but to add into your soil to regenrate and optimize your existing soil! Just work it into your soil as described below.
-
Gardens/Lawns: 3 lbs per 100 sq ft (till into soil pre-planting).
-
Potted Plants:
-
Small (6” pots): 2 tbsp mixed into soil.
-
Large Containers: ½ cup per gallon of soil.
-
-
Turf/Shrubs: 3 lbs per 100 sq ft (sprinkle and water in).
-
Pro Tip: Reapply every 4-6 weeks during growing seasons!
Frequently Asked Questions:
What is TurboSoil?
A soil supplement containg a premium blend of humic acid, crab shell, amino acids, kelp, yucca, and mycorrhizae that revitalizes soil, strengthens roots, and boosts nutrient absorption. Builds living, fertile soil for long-term plant health.
What makes TurboSoil different from other soil conditioners?
TurboSoil isn’t just a humic product—it’s a full biological blend that combines humates, amino acids, kelp, yucca, crab shell, and mycorrhizae. It feeds soil microbes, improves root structure, and strengthens plant immunity all at once.
Can I use TurboSoil with fertilizers or compost?
Absolutely! TurboSoil enhances the performance of any fertilizer by improving nutrient uptake and reducing leaching. It’s also a perfect complement to compost and organic feeding programs.
Is TurboSoil safe for vegetables and edible plants?
Yes—100% safe and natural. It’s made only from plant- and ocean-based ingredients and contains no chemicals or animal waste products.
How often should I apply TurboSoil?
Once per month during active growth, or every 2–3 weeks for poor or stressed soils. Regular use builds soil health over time.
Can I see results quickly?
You’ll typically see improved soil texture and plant vigor within a few weeks, but TurboSoil’s greatest benefits come with consistent use—it builds healthier, more resilient soil season after season.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 16 reviews
Sort
Product Reviews
★★★★★ 5
Easy to apply.
Size: 4 Oz
Product did a great job renewing my plastic house shutters. It brought back the deep rich color and made them look better the new.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Great Stuff
Size: 120 ML
Product is good, Easy to spread for the most part. The only complaint I would give it is that the applicators do not hole up after several applications, I would suggest using a microfiber cloth to apply.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Restored My Trim Instantly
Size: 120 ML
I used this plastic restorer on the faded trim around my SUV, and the difference was immediate. The dull gray plastic turned back to a rich black color within minutes. It spreads evenly and doesn’t leave greasy streaks behind. After a few weeks and several rainy days, the finish still looks great. My car honestly looks years newer now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 5
Great result, exceptional value, and easy, forgiving application.
Size: TRIM COAT KIT
I am thoroughly pleased with the results of this product, and the application was easier than I expected. Outstanding stuff. I am writing a longer review in case it helps people who are unsure about a "once and done" product that calls itself permanent. It's not hard to apply. It is forgiving and there's time to even it out. But here are some things to anticipate.
My use case:
I used Cerakote to restore the plastic trim on a used 2014 black Dodge Challenger that had been repainted but the plastic trim was original and it had been kept outside by the prior owner, so the contrast between the new paint and faded trim was noticeable. The trim was originally a deep, dark gray (it is never as black as the paint). It had faded to a medium-gray in many places: running boards on the side beneath the door, below the read bumper (which were also somewhat worn from debris), around the tail lights, and the plastic piece beneath the windshield wipers between the windshield and the hood. These were all looking weathered. The trim was very oxidized in some places, chalky grey near the hood and around the back bumper. The plastic around the tail lights also had light streaks in it from where water drains down from the trunk.
What else I tried before I tried Cerakote:
I got middling results from Mother's Back to Black. It looked somewhat better for a week or two, and then it went back to looking as before. Not impressed.
I got a tip online to try rubbing the plastic trim with a melamine magic eraser, so I did that next, and this made a significant difference. Melamine is abrasive, so be careful if you do this on your trim. I went gently, up-and-down, side-to-side and in small circles, by hand, with gentle pressure like one would with a polishing compound. By removing the oxidation, the plastic was a few shades darker in the worst spots and the streaking on the rear tail light piece was gone. The rough spots on the trim at the bottom of the car and around the wheels looked somewhat better. But it certainly did not "like new."
Cerakote experience:
I decided to give Cerakote a try based on the video and good reviews. Bam! Back to factory-like deep dark gray. I wish I had taken pictures. It's incredible. Fully satisfied!
I had already washed the trim with Dawn dish soap. I started with the trim bone dry. You are warned everywhere that water droplets will ruin the result, so don't expect to do this process right after you wash the car unless you like to live dangerously and have compressed air to spray cracks and crevices.
I was worried that application would be streaky if I didn't do it right. Not so. It is forgiving. Here's what I learned.
1) The first 20% of what you'll get out of the packet goes on heavy with the lightest touch. One packet goes a long way. The next 60% is the "normal" application. This goes on the easiest. You can really milk the last drop out of each towelette, but I didn't because the last 20% of what you can get out of it by rubbing it really hard comes out very light and is not worth the uneven application unless you have some random area you don't care much about and want to use the remainder for that. I only used 5 packets to do the whole car.
When you start a new packet, the beginning is where you might want to go back later and even it out once the application gets more normal. Or better, start a new packet on a big section to spread it around well and then move to smaller trim when the towelette is less fresh.
2) You've got time to work with it and make corrections. It stayed liquid like water for at least 20 minutes in my conditions: about 80 degrees, not very humid, indirect sunlight on an 80 degree car. Don't apply in direct sun or on a hot car. The product then gets sticky as it cures, but you can still work with it during the sticky time, rubbing it in and spreading it evenly with the towelette. I did not use a microfiber to "knock down" heavy spots. I just came back around with the towelette. I think a dry microfiber might pull off too much product. When it is half-cured, it is sticky and you can buff it with the towelette at this stage to further flatten and even things out. Work in sections, one piece of trim at a time.
3) Overlaps won't show as long as you rub it all in thoroughly. I tried the overlapping parallel passes method that they recommend, and this works pretty well. I was worried that I might get a "double heavy" streak where the passes overlap but this not so unless the towelette is fresh, but this is fixable. You can do a pretty natural, casual back-and-forth motion for the most part and it comes out fine. This is NOT a super-finicky product. I made a second or third back-and-forth pass in a few areas, and used circular motion in some places where the trim was textured or a little rough from wear, and it all looked even in the end. Just rub it down into the plastic and even out the sheen while it is uncured and it's good.
4) It cures like you see it when it's still wet. It doesn't lighten up very much as it cures. It just looks a little less wet. So get it right by eye when it is wet and that's pretty much what you will still have in an hour when it is cured.
5) Don't miss a spot! You'll see it for sure if you do because the different is so dramatic. And a "second coat" is not easy or recommended. This is the only once-and-done part that you want to get right, and you have plenty of cure time to be thorough.
6) Use the folded corner of the towelette to get into small corners and edges, like where the trim meets the paint or has an inside corner or some little nook. A fresh towelette is great for getting into small areas because a feather touch applies plenty of product when the towelette is fresh.
The trim now looks amazing and I am entirely satisfied. I will use Cerakote on my other vehicles. The only minor con is a strong ammonia smell when you are up close to it while it is wet. No smell once it is cured. I would definitely wear the recommended gloves while applying. As others say, you will probably drop that towelette on the ground. It's slippery when wet. Keep it folded in quarters as it comes for ease of application. Turn to a new quarter once a side gets dirty or dry and fold it inside out for four more quarters to use.
Bonus, but off-label -- at your own risk:
The product is not intended for the soft rubber around the windows, but I tried it there too, and it looks amazing. All I did was wash the rubber with dish soap like the trim, and I rubbed it a few times with a wet microfiber cloth to get the superficial layer of oxidized rubber off. Then I applied Cerakote. It looks great.
The rubber used to be blotchy and faded. The microfiber evened this out a little. I would not use melamine on the rubber -- this made it look worse in a test section. The Cerakote made it look great: jet black, much shiner, and much more even looking. Not quite "brand new" but far better than I thought possible. I thought I might need to replace the rubber. Now it's looking great next to the jet-black new paint. This afterthought use alone was worth the money.
Can you apply a second coat the next day?
They don't say you can, and I don't recommend it. This is meant to be one-shot, which is why you should check to make sure you don't miss any spots.
I had two areas where I tried a second coat the next day. The first was on the plastic trim between the windshield and the hood. I didn't rub this trim much with melamine beforehand so there was a lighter area (light grey originally, the worst spot) that didn't get as black as the other sections so I did it again, which helped a little, but not much. I didn't wash this area with soap beforehand because I wasn't intending to fix it until I got going. Once you put things back to black you will start noticing other faded things more.
Likewise, I did a second coat on the very top of the soft rubber at the bottom of the windows (the part which faces upward and thus gets the most sun), it wasn't as shiny as the other parts, so I went over that section gently again the next day with a fresh towelette.
As soon as I did it, I thought it was a mistake. This didn't go well initially because the cured coating is very hydrophobic so the new, wet, Cerakote of the second coat goes on smooth initially and then "puddles up" into little droplets a few minutes later. It doesn't want to stick to the first coat. I thought I had messed it up, but I let it cure a little until the sticky phase, and spread it out again with the towelette. It stayed that time but gathered back a little into some streaks. I spread it once more a few minutes later and it looked good. It stayed even. It looks just fine a few days later, so I think it cured OK.
I hope this product last for months as advertised. Even if it doesn't I would totally do it again because the results are superior, I still have half my towelettes left, and the product is not expensive. 10/10 would do again and will recommend to everyone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 25, 2025
★★★★★ 5
Easy to use, amazing results
Size: TRIM COAT KIT
This is an awesome product that is easy to use and has amazing results. My plastic trim never looked so good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026