Pay in installments of $5.45 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 25 - Sep 30
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
purpusorum succulent Purpusorum Echeveria | Echeveria purpusorumPurpusorum Echeveria, botanically listed as Echeveria purpusorum, is a live succulent plant selected for its distinctive form and ornamental appeal. Natural color, size, form, and presentation may vary slightly with season, maturity, and growing conditions. Echeveria purpusorum is a captivating succulent known for its unique and striking appearance. Below is a detailed overview of its morphological characteristics, growth habits, maintenance points,
Purpusorum Echeveria, botanically listed as Echeveria purpusorum, is a live succulent plant selected for its distinctive form and ornamental appeal. Natural color, size, form, and presentation may vary slightly with season, maturity, and growing conditions.
Echeveria purpusorum is a captivating succulent known for its unique and striking appearance. Below is a detailed overview of its morphological characteristics, growth habits, maintenance points, and reproduction method in English.
Morphological Characteristics
- Leaves: Echeveria purpusorum has small, rosette-forming leaves that are green with red to brownish spots. The leaves are thick, succulent, and have a slightly rough texture, which is unusual for Echeverias. The rosettes are compact, typically growing up to 4 inches (10 cm) in diameter.
- Size: It is a small-sized Echeveria, with individual rosettes reaching about 4 inches in height and width. Over time, it can produce offsets around the base, forming a clump.
- Flowers: This plant produces bell-shaped, orange-red flowers on slender, arching inflorescences that can be quite tall in comparison to the plant size, usually appearing in the late spring to early summer.
Growth Habits
- Light: Prefers bright, indirect sunlight. Direct afternoon sun can scorch the leaves, while too little light can cause the plant to stretch (etiolate).
- Temperature: Thrives in a temperate climate and needs to be protected from frost, as it is not cold-hardy.
- Water: Watering should be done according to the "soak and dry" method, where the soil is allowed to dry out completely between waterings. Be cautious of overwatering, which can lead to root rot.
Maintenance Points
- Soil: Well-draining soil is crucial; a cactus or succulent mix is ideal.
- Pot: Use a pot with a drainage hole to prevent water accumulation. A terracotta pot is a good option because it allows the soil to dry more evenly.
- Fertilizer: During the growing season (spring and summer), you can feed the plant with a diluted, balanced, liquid succulent fertilizer once a month to encourage growth.
- Pruning: Dead or damaged leaves should be removed to maintain health and appearance.
Reproduction Method
- Offsets: Echeveria purpusorum produces offsets (baby plants) that can be gently removed from the mother plant once they have formed a good root system. Allow the offset to dry for a day or two before planting it in well-draining soil.
- Leaf cuttings: Leaves can be gently twisted off the plant, making sure to get the entire base. Allow the leaf to callous over for a few days, then place it on top of soil. Roots and a new plant will eventually form at the base of the leaf.
- Seeds: Though not the most common method for casual gardeners, Echeveria purpusorum can be grown from seeds. The seeds should be sown in a well-draining medium and kept moist until germination.
Echeveria purpusorum is valued for its distinctive appearance and is a beautiful addition to any succulent collection, whether grown in containers, as part of a succulent garden, or used in arrangements. Its care requirements are typical of Echeverias, making it accessible to enthusiasts of all levels.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
★★★★★ 5
Stable and easy to assemble
I used these to support a heavy piece of countertop would to create a side table. Looks great and holds steady.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2023