SKU: 51941145555
paradise plant house

paradise plant house Bird of Paradise

Sale price$26.07 Regular price$28.97
Save 10%

Pay in installments of $7.24 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 27 - Oct 2

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

paradise plant house Bird of ParadiseBird of Paradise Orange White vs Orange The interesting flowers of this popular tropical shrub are often considered a nature's work of art. Unique exotic orange blooms are often described as a bird in flight, as a colorful crane's head, or even a sunbird drinking water. The slow growing plant forms a clumping habit with thick gray green leaves upon graceful upright stems. Best with partial sun to partial shade, consistently moist soil and high

 

Bird of Paradise - Orange

White vs Orange

The interesting flowers of this popular tropical shrub are often considered a nature's work of art.  Unique exotic orange blooms are often described as a bird in flight, as a colorful crane's head, or even a sunbird drinking water.

The slow growing plant forms a clumping habit with thick gray green leaves upon graceful upright stems. Best with partial sun to partial shade, consistently moist soil and high humidity.

Grows to be about 4 ft. tall at maturity, extending to 5 ft. when in bloom, with a 3 ft. W spread. An outstanding tropical accent usually used as a dramatic focal point, where it can show off its unusual form and beauty.

A fine choice for the garden and outdoor patio pots, where it is often used as the "thriller" in a thriller-spiller-filler container planting.

  • Bold statement with exotic bright orange blooms amongst its green foliage
  • Considered wind resistant, tolerates arid climates and coastal sites
  • Flowers profusely year round when grown outdoors in warm climates
  • Flowers are excellent for cutting

    Advantages:

    Easy To Grow

    Low Maintenance

    Great For Mass Plantings

    Good For Containers

      Grows Best:

        Landscape

        Container Plant

        House Plant

      Ideal position:

      Full Sun

      6 + Hours best

      Growth Outlook:

      Height: 2'- 6'

      Wide: 3' - 4'

      Growth Rate: Fast

      Plant Spacing: 12" - 18"


      Bird of Paradise Orange

      The Bird of Paradise Orange, scientifically known as Strelitzia reginae, is a striking tropical plant renowned for its vibrant orange and blue flowers that resemble the plumage of a bird in flight. This evergreen perennial, native to South Africa, features large, banana-like leaves that add a touch of exotic elegance to any landscape. The Bird of Paradise Orange thrives in warm, sunny climates and can be grown both indoors and outdoors in suitable conditions.

      To cultivate this stunning plant successfully, provide well-draining soil, ample sunlight, and regular watering to keep the soil consistently moist but not waterlogged. Fertilize during the growing season to promote healthy growth and flowering. Pruning dead or damaged leaves can help maintain the plant's appearance and health.

      With its bold colors and unique form, the Bird of Paradise Orange makes a striking focal point in tropical gardens, courtyards, or as a container plant on patios and balconies. Its dramatic flowers attract pollinators like birds and butterflies, adding life and vibrancy to any outdoor space.

      Suitable Landscapes

      The Bird of Paradise Orange (Strelitzia reginae) is not only celebrated for its striking, exotic flowers but also for its versatility in various applications, both in landscaping and interior design. Here are some of the primary uses for this vibrant plant:

      Ornamental Plant: Its unique appearance, with bright orange and blue flowers that resemble a bird in flight, makes it a popular choice for ornamental purposes. It adds a tropical flair to any setting.

      Landscape Design: The Bird of Paradise Orange can be used as a focal point in garden beds, adding height and color. It's also effective when planted in groups along borders or as a privacy screen. Its large, green leaves provide a lush backdrop for other plants.

       Indoor Plant: In cooler climates, it's commonly grown indoors as a houseplant. Its ability to tolerate low light (though it blooms best in bright light) and its air-purifying qualities make it a favored choice for adding greenery to homes and offices.

      Patio and Balcony Gardens: When potted, the Bird of Paradise can decorate patios, balconies, and other outdoor living spaces. Its dramatic foliage and flowers enhance the aesthetics of seating areas and outdoor entertainment spaces.

      Theme Gardens: It's an ideal plant for tropical or subtropical themed gardens, where it can be combined with other tropical plants like palms, cycads, and ferns to create a lush, exotic landscape.

      Poolside Planting: Its tolerance for reflected heat and sunlight makes it suitable for poolside planting, where it can contribute to a resort-like atmosphere.

      Incorporating the Bird of Paradise Orange into your garden or home not only adds a touch of the tropics but also brings vibrant color and an artistic element to your space.

         Caring For

        Ideal position Water Temperatures Food

         

        Caring for a Bird of Paradise Orange (Strelitzia reginae) involves providing the right conditions to ensure its health and encourage optimal growth and blooming. Here are some essential care tips for this striking tropical plant:

        Sunlight: Place your Bird of Paradise Orange in a location that receives bright, indirect sunlight. While it can tolerate some shade, it thrives best with at least 4-6 hours of sunlight daily. Rotate the plant occasionally to ensure even growth.

        Watering: Water the plant regularly, keeping the soil consistently moist but not waterlogged. Allow the top inch of soil to dry out between waterings. Reduce watering during the winter months when growth slows down.

        Humidity: Bird of Paradise Orange appreciates high humidity levels. Mist the leaves occasionally or place a humidifier nearby, especially in dry indoor environments.

        Temperature: Maintain temperatures between 65-70°F (18-21°C) indoors. Outdoors, it can tolerate higher temperatures but should be protected from frost and cold drafts.

        Fertilization: Feed your Bird of Paradise Orange with a balanced, water-soluble fertilizer every 4-6 weeks during the growing season (spring and summer). Reduce feeding in fall and winter when growth slows.

        Pruning: Remove dead or damaged leaves regularly to maintain the plant's appearance and health. Trim back any yellowing or brown leaves to encourage new growth.

        Repotting: Repot your Bird of Paradise Orange every 2-3 years or when it outgrows its current container. Use a well-draining potting mix and a container with drainage holes to prevent waterlogging.

        Pest Control: Keep an eye out for common pests like spider mites, aphids, and mealybugs. Treat infestations promptly with insecticidal soap or neem oil.

        Flowering: While Bird of Paradise Orange may take a few years to bloom, providing optimal care can encourage flowering. Ensure it receives adequate sunlight, water, and nutrients.

        By following these care guidelines, you can enjoy the beauty of your Bird of Paradise Orange plant and help it thrive in your indoor or outdoor space.



            Shipping Notes
            • Free Standard Shipping on $100+ Orders to the USA.
            • Except Preorder products are shipped in 48 hours.
            • Delivery to the USA:
            1. Standard Shipping : 3-10 business days
            • If time is of the essence, please consider selecting expedited delivery for faster service.
            Exchange/Return Notes
            • We offer a 30-day return/exchange service after receiving.
            • Final sale items are not eligible for returns or exchanges.
            • To process your return/exchange, please contact us at [email protected]
            • Please click here for more details>>> Return & Exchange Policy
            SKU: 51941145555

            Discover Niche Categories That Outsell paradise plant house

            Top-Converting Item to Boost Your Average Order

            4.4 ★★★★★
            Based on 6 reviews
            Sort
            Highest Rating
            Newest First
            Oldest First
            Product Reviews
            H
            Verified Purchase
            hearmeout
            Battle Creek, US
            ★★★★★ 4
            One - Month Review
            Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
            First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
            WAS THIS REVIEW HELPFUL?YesReportShare
            Reviewed in the United States on April 5, 2026
            S
            Verified Purchase
            Sid Hubbs
            Carnegie, US
            ★★★★★ 5
            The K2 SE is a great entry level printer. Don't let the naysayers get you down!
            Set name: K2 SE
            I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
            WAS THIS REVIEW HELPFUL?YesReportShare
            Reviewed in the United States on May 20, 2026
            R
            Verified Purchase
            ReluctantConsumer
            Massapequa, US
            ★★★★★ 5
            Creality K1 SE - Prints great with stock settings - needs a side spool mount
            Set name: K2 SE, Set name: K2 SE
            I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
            WAS THIS REVIEW HELPFUL?YesReportShare
            Reviewed in the United States on January 21, 2025
            G
            Verified Purchase
            Geoff
            Phoenix, US
            ★★★★★ 3
            Almost Good
            Set name: K2 SE
            The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
            WAS THIS REVIEW HELPFUL?YesReportShare
            Reviewed in the United States on February 5, 2026
            J
            Verified Purchase
            Joshua McPheron
            Massapequa, US
            ★★★★★ 5
            Assembly Tricks And Tips.
            Color: Dark Grey, Size: 5 Seat
            All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
            WAS THIS REVIEW HELPFUL?YesReportShare
            Reviewed in the United States on April 28, 2026

            recommand products