Pay in installments of $6.71 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 28 - Oct 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex 770at Cybex 770AT Arc Trainer – Midwest Used Fitness EquipmentCybex 770AT Arc Trainer: Perfect for fitness fans of any level, the 770AT Arc Trainer from Cybex has a user friendly touch display and a long list of settings for workout customization. This is a high end commercial upgrade from the 625AT that offers a wider range of options for strength, power, and weight loss while burning more calories than most other cross trainers or elliptical machines. The 770AT Arc Trainer is a high end commercial cross
Cybex 770AT Arc Trainer:
Perfect for fitness fans of any level, the 770AT Arc Trainer from Cybex has a user-friendly touch display and a long list of settings for workout customization. This is a high-end commercial upgrade from the 625AT that offers a wider range of options for strength, power, and weight loss while burning more calories than most other cross trainers or elliptical machines.
- The 770AT Arc Trainer is a high-end commercial cross training workout machine that does the work of three machines in one.
- Muscle Map Display: This standard display screen allows you to easily monitor your progress without distraction.
- Glide, Stride, and Climb Zones: This broadens your workout and allows you to train like you are using three different machines. Set in low position for the Glide zone, medium position for Stride, and high position for Climb.
- Muscle Targeting: The machine’s unique range of incline and resistance settings allows you to focus on different muscle groups throughout your body, which you can monitor using the innovative Muscle Map.
- Reverse Arc Motion: Using patented advanced stride technology, the Reverse Arc Motion makes it so your legs move in a natural, biomechanically correct pathway while taking stress off the knees and hip joints. This also allows you to burn more calories and take on more advanced workouts.
- Workout Selections: Start in Quick Start mode to begin training right away, or choose from two weight loss workouts, three strength, two shaping, two cardio (including heart rate control), and two power workouts. This also includes Adaptive Power Mode, which changes the machine’s resistance according to your speed.
- Footprint: 76"x37"x62.5" (29" frame handles are 37"w)
- Max User Weight: 400lbs
- Stride Length: 24"
- Stepup Height: 6"
- Machine Weight: 405lbs
BURNS MORE CALORIES
More results in less time. Research shows that the Cybex Arc Trainer burns more calories than any other cross trainer or elliptical cross trainer tested. The science behind the Arc Trainers big calorie burn is the Arc motion. It engages the right muscles quads and glutes that demand lots of energy from the body when they are called upon to work. That means big calorie burn. And because the Arc is demanding of the muscles not the joints, it can be used longer without putting a strain on the knees, hip or back.
THREE MACHINES IN ONE
Train for strength, power, endurance, cardio, and weight loss. The Cybex Arc Trainer offers broad incline and resistance ranges which mean it is really 3 machines in one. At the lower incline levels, the glide is a cross country skier. In the mid-range levels, the motion is a stride (like an elliptical except with proper positioning). At the high levels, the climb of a stepper or climber. Glide, Stride, and Climb. And lots of programs make the Arc Trainer fun to use.
EASY ON THE JOINTS
No more elliptical knees. Unlike other cross trainers on the market the patented Arc pattern of motion allows the hip and knee to move synchronously while the foot stays under the knee reducing joint pains and providing a more comfortable workout.
DISPLAY FEATURES:
Innovative Muscle Map displays the intensity of the exercise for individual muscle groups based on the users selection of stride rate, resistance and incline to aid them in precisely targeted results.
LOAD DEPENDENT: The Arc is load dependent which means that resistance is scaled to the user's weight. Two exercisers, a man who weighs 230 lbs. and the other a woman who weighs 120 lbs., both get the same workout when they enter the same program levels and their own weight. The perfect workout, and only Cybex has it.
REVERSE ARC MOVEMENT: This is what makes the Arc an Arc. The unique Reverse Arc motion, a patented advanced stride technology, never places the users toe behind the knee (when the toe moves behind the knee significantly more stress is applied to the knee joint). The Reverse Arc Motion moves legs in a biomechanically correct pathway - reducing stress at the knee while offering a complete range of motion for both the knee and hip.
SAME SIDE FORWARD: With Same Side Forward (SSF), the arm and leg on the same side move together, so that the relationship with the arm handle and footplate remains the same regardless of incline. This allows the user to always maintain optimal posture during exercise which virtually eliminates stress on the back. Other cross trainers, with arms and legs moving in opposite directions, lack the ability to maintain correct body positioning throughout the incline range.
MUSCLE TARGETING: The wide range of resistance and incline makes the Arc Trainer unique. From the deconditioned to professional athletes, it is right for everyone! Using this broad incline and resistance range, anyone using this product will notice they have the ability to emphasize specific muscle groups, whether at higher incline levels as a stepping motion to work the quads or lower levels of incline with increased resistance to firm up the butt!
GLIDE, STRIDE, AND CLIMB ZONES: The Arc offers three exercise zones for the ultimate in variety: Low position is for the Glide; Medium position called the Stride and High position for the Climb.
LONG INPUT ARMS: The Arc Trainer is equipped with long input arms with a more linear path versus the shorter handles found on other cross trainers. This near linear path minimizes painful wrist articulation allowing you to get a better upper body workout and maintain good posture. Additionally the arms feature forward outboard handles allowing you to push harder with your upper body while opposing lower body muscles are engaged resulting in more muscles working at once and therefore more calories being burned in less time.
WORKOUTS: The 770 Arc Trainers unique workout selections allow the user to select their workout based specifically on their goals. Workouts include two Weight Loss, three Strength, two Shaping, and three Cardio including Heart Rate Control, a well as two Power workouts that include the Arc Trainers unique Adaptive Power mode.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 15 reviews
Sort
Product Reviews
★★★★★ 4
Overall, very good for the price.
Size: 13"-32", Style: Single, Size: 13"-32", Style: Single
For the price, I’m pleased with it.
Overall, it’s a sturdy stand with quality machining. All the screws went in easily, poorly machined products have crooked holes or bad threads. The mount base comes with 2 types, standard mount for a desktops surface. The other one is for desktops with monitor holes/cabling drilled through them. All the parts are heavy gauge and I encountered no difficulty during assembling.
There seems to be a tension screw for the tilt feature. I had to tighten the screw that holds the tilt joint together because out of the box, the monitor flopped forward hard. I had to be mindful while mounting it to the main arm so it wouldn’t slam into my glass desktop.
The 2 arms that allow you to move the monitor forwards and back, left and right were a little stiff, I loosened the screw a bit on the main arm, at the pole. That seemed to be all that was required. I tried to loosen the bolt where the 2 arms meet, and it wouldn’t budge. I didn’t force the issue.
The instructions were adequate for assembly without covering anything else, like adjusting the tilt bolt for the weight of the monitor.
So, while I think this was a good mount for the investment, there are tradeoffs to mention.
I’m accustomed to swinging my monitors upward and dusting underneath them. Height is fixed by a screw on this one.
I was struggling to install the monitor cables when I realized you can tilt the bottom toward you until the top or the monitor hits the pole, or, until it’s sitting nearly flat like a table. Elevated several inches above the desktop. I consider this a Pro / Con feature.
Where the arm ties into the VESA mount, the fit is a little sloppy. It’s not a safety concern but I can wiggle the monitor backwards and forwards at the outer edges “About ¾ inch “before feeling any resistance from the mount. Same goes for tilting. I don’t see this as much of an issue. Normally, I don’t foresee any outside forces acting in the monitor to create a problem. However, there’s room for improvement. The rest of the machining seemed steller.
I have multiple computers in different rooms. 32” monitors are used as primary monitors with 32” to 23” as secondaries.
I like mine roughly 1” above the desk. That places the top of the monitor at my eye level and the ideal viewing angle.
I have fully articulated, hydraulic mounts on most of my monitors. Nice ones for large heavy monitors run $75 to $100 and up.
I paid $36 for this one. The……… WALI Monitor Arm Mount for Desk, Single Extra Tall Computer Desk Mount, Monitor Bracket Mount Stand Single, up to 32 inch, 22 lbs (M001XL), Black.
Amazon lumps the reviews of similar products together, so I specified which mount I purchased.
I’m using this one on a glass desktop, I’m attaching it to the same point I constructed from wood for a different mount. It didn’t lower the monitor low enough either. So, the top of that mounting point is 4” lower than the surface of the glass top.
Despite being that low, I didn’t actually need the 32” pole / monitor mount, the 16” model would have worked.
There’s still 2” of pipe available above the arm. The 32” was on sale & I didn’t know if the 16” would suffice. The pole is a screw together 2 piece. I unscrewed / removed the other pole as it looked out of place in my dual computer setup.
That leaves a hole in the top of the pipe / mount. I wish they included a cap for that. The top pipe has a cap but of a different diameter.
I’d like to give it 4 ½ Stars but Amazon won’t let me. I’ve got to go with 4.
Height adjustments with heavy monitors and an Allen wrench can present a challenge, it’s the nature of the beast and I won’t give it 5 stars for a few reasons. The sloppy VESA mount and loose tilt motion. No instructions that cover that, or if I was supposed to loosen the arm at the pole to improve motion.
I would recommend this mount to others.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2024
★★★★★ 5
Excellent mount, especially if you want your monitor mounted higher above the desk.
Size: 13"-32", Style: Single
This is the monitor mount I should have had all along. The extra tall pole allowed me to mount my 32" monitor at the correct height (something I couldn't do with the spring-mount I previously had. It came with good directions, everything needed for install except for a Phillips head screwdriver and a 10mm wrench for one cap nut. The arm that holds the monitor is highly adjustable, and once everything is tightened down, very sturdy. I recommend this one without reservations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 1, 2026
★★★★★ 5
Easy and Functional for 3 Monitor Setup
Size: 13"-27", Style: Triple
Some assembly required. Used this to re-configure my 3 monitor setup. 2 27" monitors across the bottom and a 20-ish" monitor up top. First and foremost, anything bigger than 27" on the bottom two and it will not work. The span was just barely long enough for my application and still allow for any articulation of the monitors. I would prefer to have them angle towards me just a little more, but it works. Assembly was straight-forward. Instructions were pretty clear as far as the pictures go. I didnt actually read the text, but thats pretty much how obvious it is to assemble and mount the monitors. The tubing and clamps feel heavy-duty. With the exception of a drill, drill bits, and phillips head screw driver, they provide the tools and hardware necessary to assemble, mount and adjust the monitors, to include longer screws and offsets for the monitors if required.
Installation on my desk went well. I used the through hole option strictly due to the desk not being able to accomodate the clamp. Word of caution... with all three monitors hung on the mount, this thing is HEAVY and all supported by just the main tube. If you use the clamp option, make sure your desktop/tabletop will allow the clamp to fully seat. Otherwise, you run the risk of it slipping loose and you'll be wearing the monitors if you happen to be sitting in front of them when it comes down.
Once all the monitors are mounted, the overall setup is surprisingly sturdy considering the size of the main support tube. Yes, it will wobble some, but overall, it works pretty well and once the clamps are locked into place the monitors stay in place. Took a couple of hours for me to get it all set up, but it could be done quicker I'm sure.
All in all, me likey!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 13, 2022
★★★★★ 5
Good value, well made, easy assembly.
Size: 13"-32", Style: Single
Well made, easy assembly, very versatile and cable management included.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 5
Overdo is what I do
Size: 13"-32", Style: Single
Since my 50" monitor is under the 22lb weight limit, I decided to give this arm a shot. Nobody seems to make an arm for something as big as a 50-inch even if they don't actually weigh that much.
So what happened? The arm CAN support that weight and size. The manufacturer did a great job on the materials and it assembles very easily. For a regular monitor, this arm should work great.
But the clamp design is not exactly sturdy enough for my bigger screen that exceeds the intended use. Clamped to the table top alone, the pole had a serious and unsafe lean to it. I ended up reinforcing my table with three layers of plywood secured with lag bolts right through the table top. Between the layers of plywood is the table top and a steel beam that the table top sits on. So this is a ridiculously strong base. With that in place, the arm does hold the monitor in the fully retracted position. Extended, there is way too much leverage and the arm starts to lean. So don't do that. It needs to stay totally retracted to the pole.
To fit my monitor, I had to get VESA extension wings and those worked fine. This provides the solution I am going to use: angle irons bolted to the wings and running down to the table. I have room to do this. The angle irons will take up most of the weight and let the arm stay vertical and let me move it around. So it will be a three-legged mount instead of one. Eh. It will work fine for me until I come up with something better.
Very tempted to drill holes in the clamp base and lag bolt that to the table. Nothing is going to beat that except welding it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2022