SKU: 70607040615
world's largest jade plant

world's largest jade plant 3-5 FT Jade Succulent Bonsai (Crassula) – Dahing Plants

$21.20 $23.56
Save 10%
No.2 Bestseller on streamingart.org >

Pay in installments of $5.89 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 27 - Oct 2

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

world's largest jade plant 3-5 FT Jade Succulent Bonsai (Crassula) – Dahing PlantsDescription The jade bonsai brings a peaceful presence to any home. Its glossy leaves and THICK woody trunk give the plant a bonsai look or a mini tree look. Having a mini tree that's also a succulent? Yes please! it creates the sense of calm we all need. The jade bonsai isn't your ordinary houseplant it's a miniature masterpiece, offering wonderful company without demanding constant attention. And it grows more beautiful with time, just like your

Description

The jade bonsai brings a peaceful presence to any home. Its glossy leaves and THICK woody trunk give the plant a bonsai look or a mini tree look. Having a mini tree that's also a succulent? Yes please! it creates the sense of calm we all need.

The jade bonsai isn't your ordinary houseplant – it's a miniature masterpiece, offering wonderful company without demanding constant attention. And it grows more beautiful with time, just like your friendship over the years. It’s a forgiving little tree, perfect for new plant parents and established green fingers.


Care 

Are bonsai trees hard to maintain?

We know many people worry about bonsai care, but your jade bonsai is wonderfully understanding! Unlike more demanding varieties, it’ll forgive occasional neglect and keeps thriving even when life gets hectic. Perfect for nurturing your confidence.

Jade bonsai care is refreshingly straightforward, making it ideal for both beginners and busy plant enthusiasts. You just need to focus on three simple things: proper light, infrequent watering, and occasional pruning. We're here to guide you through each step.


How much light does a jade bonsai need?

Your jade bonsai flourishes in bright, indirect sunlight – think of it as your plant's daily vitamin D! Give your little tree 4-6 hours of bright light each day, but protect those delicate leaves from harsh direct rays.

Learning how to care for a jade plant is wonderfully simple: provide good light, water thoughtfully, and give it space to grow at its own pace. 


How often do you water a jade plant? 

Your jade plant appreciates a thoughtful watering approach. Wait until the soil feels nearly completely dry before offering a drink – usually every 2-3 weeks. It's better to underwater than overwater, as these resilient plants store water in their leaves.


Is jade bonsai good for beginners?

If you've experienced heartbreak with other plants, let the jade bonsai tree help restore your confidence! This understanding little tree tolerates learning curves and forgetfulness, making it perfect for those just starting their plant journey or wanting a fresh start.

Our small jade bonsai offers gentle encouragement as you develop your plant care skills. Behind any successful "plant person,” there might be a patient jade bonsai quietly supporting their growth. It could be the companion you need to believe in your green thumb again.


Should I mist my jade bonsai?

Your jade bonsai tree is wonderfully low-maintenance and doesn't require regular misting. While an occasional gentle mist won't harm your plant, this resilient succulent naturally thrives in drier conditions. We love how adaptable these plants are to typical home environments!


Does jade bonsai need sunlight? 

Yes, your jade bonsai needs sunlight to stay healthy and happy! These lovely trees thrive in bright conditions but appreciate protection from intense, direct rays that stress their leaves. Think of it as needing gentle warmth rather than harsh heat.

Basic jade bonsai care means providing bright indirect light and waiting until the soil dries before watering. It's a simple routine that becomes second nature, and we're always here if you need guidance along the way.


Do jade plants like deep or shallow pots?

Jade bonsai plants feel most comfortable in shallow pots with good drainage. This keeps them compact and prevents root problems that could affect their health. We want your plant to have the perfect home where it can thrive for years.


Do jade plants like to hang?

While your jade plant can adapt to hanging arrangements, these steady companions typically prefer traditional upright displays. 


How big do jade bonsai get? 

Your jade bonsai will typically reach about 1-4 feet tall when lovingly maintained, creating the perfect tabletop companion. Unlike their larger relatives that can grow up to 15 feet, these miniature beauties are perfectly sized for indoor spaces and apartments.


How do I keep my jade plant small? 

Keeping your jade plant small involves gentle, regular pruning – think of it as giving your plant a caring trim. This encourages compact growth and helps maintain that adorable bonsai form we all cherish. Your plant actually benefits from this attention!


What is the best fertilizer for jade bonsai?

Your jade bonsai appreciates gentle nutrition without overwhelming its system. A balanced, water-soluble fertilizer once monthly during the growing season provides just what it needs. We believe in supporting your plant's natural growth rhythm.


Can jade bonsai trees survive outdoor conditions?

Your jade bonsai can enjoy outdoor time in warm weather! These adaptable trees thrive outside when temperatures stay consistently between 65-95°F. Just remember to bring your plant inside before temperatures drop below 40°F to keep it safe and comfortable.

Taking your jade outside is wonderful for both of you during suitable weather. In warm climates, it will soak up the sunshine and fresh air, but always be ready to welcome it back inside when temperatures change. We want your plant to feel secure wherever it grows.


What are the best conditions for growing a jade bonsai indoors?

Your jade bonsai will thrive with bright indirect light, temperatures between 65-95°F, and soil that's allowed to dry completely between waterings. Creating these comfortable conditions helps your plant feel secure and encourages healthy growth throughout the year.

Think of your jade bonsai tree as a steady companion who appreciates consistency. Give it a shallow pot with good drainage, monthly fertilizing during growing season, and regular pruning to keep it looking its best. 



Pet-friendly?

When it comes to pet safety, we need to share some important information about your jade bonsai. True jade plants from the Crassula genus are toxic to both cats and dogs, and we want to help you keep your furry family members safe and healthy.


Are jade bonsai toxic to cats? 

Unfortunately, jade bonsai trees made from Crassula species are toxic to our feline friends. If your kitty nibbles on any part of your jade bonsai, they may experience vomiting, lethargy, or loss of coordination. Call your vet straight away. 


Are jade bonsai trees safe for dogs? 

Jade bonsai trees are toxic to your canine companions. These Crassula species can cause vomiting, stomach pain, and lethargy if ingested. Small dogs are especially vulnerable, so extra caution is needed in homes with petite pups


Factoids

Is jade bonsai the same as dwarf jade? 

Dwarf jade and regular jade are actually different plant species, each with their own special qualities! Dwarf jade (Portulacaria afra) and the jade plant (Crassula ovata) may look similar, but they're actually distinct plants with unique characteristics.


What is the significance of jade bonsai?

Your jade bonsai carries beautiful meaning beyond its appearance! These charming trees are associated with prosperity, positive energy, and good fortune. Many people give them as thoughtful gifts to share blessings with loved ones – a tradition we're honored to continue.


Do jade bonsai trees lose their leaves?

Your jade bonsai tree keeps its leaves year-round. If you notice leaf drop, it's usually your plant's gentle way of telling you something needs adjusting – perhaps watering, light, or temperature. We're here to help you understand these signals.


Do jade plants flower? 

Your jade can surprise you with blooms! With proper care, jade plants produce lovely white or pink flowers in late spring to early summer. They often come after a brief dry period – nature's way of celebrating resilience together.


How long do jade bonsai live?

With loving care, your jade bonsai can be a lifelong companion! These remarkable plants can thrive for over a hundred years, potentially becoming heirlooms passed down through generations. We think that's pretty special – a living legacy of care and connection.


How big does a jade plant get? 

Jade plant relatives can reach an impressive 10-15 feet tall! But as a cherished bonsai, yours will stay beautifully compact at about 2-4 feet, depending on your pruning care. This size makes it an ideal companion for any space.


Buy a Jade Bonsai

Are you ready to start a rewarding journey with your very own jade bonsai? Our jade bonsai trees come with all the patience and charm you need for successful plant parenthood – there’s no experience required!

Each jade bonsai tree has been carefully nurtured to bring you years of peaceful companionship. Perfect for busy families, new plant parents, or anyone seeking a gentle introduction to the world of bonsai. Let us help you find the perfect green companion today!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70607040615

Discover Niche Categories That Outsell world's largest jade plant

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
H
Verified Purchase
hearmeout
Los Angeles, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Bozeman, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Phoenix, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Charlottesville, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
J
Verified Purchase
Joshua McPheron
Houston, US
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026

recommand products

Apollo Jogging Stroller
29.54
BOB Revolution Flex 3.0 Duallie Jogging Stroller
27.18
Orbit Baby
23.36
Baby Trend Expedition Double Jogger Stroller
23.92
Baby Jogger Summit X3 Double Jogging Stroller
24.51